(888) 306-6688

🚚 FREE SHIPPING for U.S. orders over $200

🌎 SERVING CUSTOMERS worldwide for over 10 years

Line Voltage PIR In-Fixture Occupancy Sensor (Dimming, UL Listed) - LiteControls
Sold Out
  • Part Number: S618-P-DR-LS2

Line Voltage PIR In-Fixture Occupancy Sensor (Dimming, UL Listed)

Save by buying from LiteControls!


  • Included S618-ACC-LS2 standard lens for up to 40 ft mount heights (wide lens for low bay mount of 8–10 ft also available)
  • Optional S-ACC-RC-D2 IR remote control sold separately
  • Line voltage on/off control of lighting fixture(s)
  • 0-10V dimming control compatible with dimmable LED drivers and fluorescent ballasts
  • 1 to 60 minutes dimming time delay for dimmed lighting
  • 10 seconds to 60 minutes standby time delay for a wide range of installation locations and applications
  • Internal photodiode measures ambient light and observes threshold set at measured or preset light levels
  • IR remote control allows quick setup, settings adjustment, and manual on/off override
  • Built-in quick installation testing mode
  • Compact, UV resistant, flame retardant, impact resistant, and recyclable polycarbonate construction
  • UL Listed Class 2 and IP66 rated for use in outdoor/wet locations when fully installed in equivalent rated fixture

Technical Specifications

  • Model No.: S618-P-DR sensor with S618-ACC-LS2 lens
  • Input Voltage: 120/208-40/277VAC @ 50/60Hz
  • Photodiode Sensitivity Range: 1-85 fc
  • Relay Load Ratings: 800VA max @ 120VAC; 1000VA max @ 208–240VAC; 1200VA max @ 277VAC
  • Standby Time Delay Periods: 10 secs, 1 min, 5 mins (default), 15 mins, 30 mins, 60 mins
  • Dimming Time Delay Periods: 1 min, 30 mins, 60 mins (default), off (dimming always on)
  • Dimming Levels: 0%, 10%, 20% (default), 30%
  • 0-10VDC Dimming Current: Max 100mA (sink)
  • Thread Size: G1 (BSW); Nominal: 1"
  • Weatherproof Rating: IP66 (when properly installed inside rated fixture)
  • Dimensions: 2.36 x 2.36 x 1.59 in