Low Voltage PIR In-Fixture Occupancy Sensor (Dimming)

Low Voltage PIR In-Fixture Occupancy Sensor (Dimming)

S618-P-DR12VNR

EuControls

  • Unit price per 
Shipping calculated at checkout.

{"one"=>"Only {{ count }} left!", "other"=>"Only {{ count }} left!"}

Features

  • Powered by a 12VDC source and provides on/off/dimming control of lighting fixture(s) when used with Dim-to-Off capable dimmable drivers and ballasts
  • Built-in quick installation testing mode
  • 10 seconds to 60 minutes standby time delay for a wide range of installation locations and applications
  • Internal photodiode measures ambient light and observes threshold set at measured or preset light levels
  • IR remote control allows quick setup, settings adjustment, and manual on/off override
  • Compact, UV resistant, flame retardant, impact resistant, and recyclable polycarbonate construction
  • IP66 rated for use in outdoor/wet locations when fully installed in equivalent rated fixture
  • Multiple lenses available for different coverage areas


Technical Specifications

  • Model No.: S618-P-DR12VNR
  • Input Voltage: 12VDC
  • Photodiode Sensitivity Range: 1-185 fc
  • Standby Time Delay Periods: 10 secs, 1 min, 5 mins (default), 15 mins, 30 mins, 60 mins
  • Dimming Time Delay Periods: 1 min, 30 mins, 60 mins (default), off (dimming always on)
  • Dimming Levels: 0%, 10%, 20% (default), 30%
  • 0-10VDC Dimming Current: Max 100mA (sink)
  • Thread Size: G1 (BSW); Nominal: 1"
  • Weatherproof Rating: IP66 (when fully installed inside rated fixture)
  • Dimensions: 2.36 x 2.36 x 1.59 in


Documentation

 


We Also Recommend