Line Voltage PIR In-Fixture Occupancy Sensor (Dimming, UL Listed)

Features

• Included S618-ACC-LS2 standard lens for up to 40 ft mount heights (wide lens for low bay mount of 8–10 ft also available)
• Optional S-ACC-RC-D2 IR remote control sold separately
• Line voltage on/off control of lighting fixture(s)
• 0-10V dimming control compatible with dimmable LED drivers and fluorescent ballasts
• 1 to 60 minutes dimming time delay for dimmed lighting
• 10 seconds to 60 minutes standby time delay for a wide range of installation locations and applications
• Internal photodiode measures ambient light and observes threshold set at measured or preset light levels
• IR remote control allows quick setup, settings adjustment, and manual on/off override
• Built-in quick installation testing mode
• Compact, UV resistant, flame retardant, impact resistant, and recyclable polycarbonate construction
• UL Listed Class 2 and IP66 rated for use in outdoor/wet locations when fully installed in equivalent rated fixture

Technical Specifications

• Model No.: S618-P-DR sensor with S618-ACC-LS2 lens
• Input Voltage: 120/208-40/277VAC @ 50/60Hz
• Photodiode Sensitivity Range: 1-85 fc
• Relay Load Ratings: 800VA max @ 120VAC; 1000VA max @ 208–240VAC; 1200VA max @ 277VAC
• Standby Time Delay Periods: 10 secs, 1 min, 5 mins (default), 15 mins, 30 mins, 60 mins
• Dimming Time Delay Periods: 1 min, 30 mins, 60 mins (default), off (dimming always on)
• Dimming Levels: 0%, 10%, 20% (default), 30%
• 0-10VDC Dimming Current: Max 100mA (sink)
• Thread Size: G1 (BSW); Nominal: 1"
• Weatherproof Rating: IP66 (when properly installed inside rated fixture)
• Dimensions: 2.36 x 2.36 x 1.59 in

Documentation

• S618-P-DR Datasheet
• S618-ACC-LS2 Datasheet

Accessories

• See lenses, remotes, and other accessories ➞